Over 1 million angiograms and 1.2 million angioplasties are performed in American Cath Labs each year. The demand is ever growing, especially since many heath care professionals
If you are considering creating a new Cath Lab for your clinic, hospital, urgent care or other health care facility, there are many things to consider, one being if you should purchase brand new medical imaging equipment or look at refurbished or used equipment. After all, you can often find the performance and technology you want on the secondary market at a much lower price, while still getting impressive warranties.
Analog or Digital Imaging?
Most Cath Labs built prior to 2000 are analog, with recorded information seen on cine film. But newer Cath Labs use digital equipment.
Digital equipment provides the following advantages:
X-Ray Sources
Older Cath Labs were built with single plane X-ray sources. Today’s newer equipment uses bi-plane or dual sources and flat-paneled detectors that create live moving images.
What’s the advantage of using dual sources with flat panel detectors?
Floor or Ceiling Mounting?
When choosing your Cath Lab imaging equipment, remember you can choose floor or ceiling mounts without any operation difference. However, there are different structural requirements for the room which may influence which you choose.
Ceiling-mounted devices can weigh from 700-3,000 pounds. You have to make sure your room has the structure and reinforcement in place to support these heavy components..
Choosing a Detector Size
A detector size is designated as a height X width measurement. It can also be shown as a diagonal measurement from corner to corner. For example, if a detector is 20 cm wide by 20 cm high, the diagonal measurement will be approximately 11 inches. The larger the detector size, the wider the view you can get of the area being scanned. However, most cardiac procedures don’t require a detector larger than 10 inches. Depending on the procedures being performed, larger areas might be helpful.
Software and Hardware
When purchasing Cath Lab equipment, remember: later updates to both hardware and software will remove potential bugs and add new features. You’ll want to see if the equipment you want to buy has the latest software updates. If X-ray tubes have been broken or worn out, they can be replaced in order to extend the lifespan of your medical imaging equipment. Be sure to request a list of parts that have been replaced or repaired.
Talk To An Expert
It’s also wise to talk about your medical imaging needs with an expert in order to determine if you need new or refurbished equipment in order to get the performance you need. The experts at Atlantis Worldwide have been helping clients buy and sell imaging equipment for almost 30 years and would love to help you.
To find out more, contact Atlantis Worldwide Today!
Some blogs you may have missed:
About the author: Vikki Harmonay